Rotary Nozzle Shield
Tip: Highlight text to annotate itX
The rotary nozzle shield is a handy device
That can easily attach to the end of your wand.
Its intended purpose is to contain
The out spray that might occur as your cleaning
With the rotary nozzle on.
It can also be used with a quick connect
Or meg style spray nozzle.
Basically it attaches to the end of your lance
Very simply by snapping this black plastic portion to the end
Where your rotary nozzle quick connect is
And you use this *** to tighten it down.
Essentially it is a plastic sleeve
That slides over the nozzle and as you can see
The nozzle is recessed a little bit inside of this area
So that the out spray is contained well.
It also includes two snaps basically
So you can open your cone
If you need to place a larger nozzle
Than I have here today.
Primary use is for interior areas
Or areas where you are working
That you don't want the splatter going everywhere.
Basically you hold it close to the surface
And the out spray is contained inside.
It is an inexpensive solution to be able to clean
And contain your workspace
And basically it attaches to your lance in about 5 seconds.
If you have any questions regarding this product
Feel free to visit the website or give us a call.
