How to Sew a Pillow Case Cover - Sewing edges of a pillow case
Tip: Highlight text to annotate itX
Hi, welcome to Expert Village. I am Gretchen Soares with the Butterfly Boutique. We are
going to head to the serger. We are going to finish the edges by going over them with
the serger. This will give them a nice finished edge and they will not unravel when we wash
them. Now, all of our edges have a nice clean finish on them. We will need to turn this
right side out; taking special care with each corner, making sure that we turn it right,
and that each point is nice and sharp. We will turn the corners with our fingers, making
it nice and sharp. Do that on each corner by folding and flipping. Now, we are going
to operate from the front side of this, creasing in the edge seam that we just sewed. We roll
the seams up with our fingers, and make a nice sharp crease. Take care on the corners,
making sure you get sharp corners. We are going to lay this out on the work table and
make sure that the flaps are nice and flat.
