How to mount a new mousse 140_80 -18 Enduro Cross in a circle 18 inches

After having the mousse inserted into the tyre, let's lubricate the mousse as well. Now, we are ready to fit the tyre to the rim. Let's engage the lower bead to the lower side of the tyre-block Using the lever by the curved side, pull the lower bead into the rim channel, all around the tyre Push with your hand to complete the insertion of the first tyre bead Now we have half tyre mounted and the mousse is already in place We have allign the pierced bracket with the tyre-block, then we insert a lever just 10 cm far from the tyre-block, we pull it back and fix it to the bracket arm. Insert another lever at 10 cm far from the tyre-block, at the other side. Then we insert the third lever into one of the holes of the pierced bracket and we push it against the tyre-block. Thanks to the clearance we create, the bead will easily engage the tyre-block Continue to insert the second bead inside the rim using the levers. Do little portion per time to avoid stress when we reach the last and very tight portion of the tyre , we push the tyre with the paddle to let the bead in the rim channel As you can see the bead slippend inside, and now is esier to complete the job. The all bead slipped inside. This step is very important! The job is almost completed, we can remove all the levers Now , we place the last portion of unfinished bead under the paddle and we can complete the job Now you have only to inflate the tyre! JOB DONE!