Care & Maintenance Tips for above Ground Automatic Pool Cleaner - Reassemble shroud of pool cleaner

Now that we've got the medium turbine assembly installed, it's time to put Wanda back together. She was feeling a little bit naked, we're going to fill her up. Alright, what we're going to do here is this is the cone here. This is going to place right on top of the bushing. If it ever has to be replaced and it's not spinning properly, well that's an easy proposition. It's keyed on one side and you simply just slide it into place. This just sits right on top, now, made it with the gears and that's it. Never spins that fast, but boy, that's a great sound, alright? Now, we're going to take Miss Wanda here. We're going to invert her and pick this up. It's a little bit of a juggling act 'cause we want to keep everything in place, so I'm going to hold it like this. I'm going to go back to front, but before we do that, our screen. Lady's got to have a screen, so we're going to take it over here, and it's going to slip right into the, right into the place. This little piece goes straight down and she's going to go right into here, alright? That's how it's going to look when it's done, but in order to make that happen, it's a little bit more extended than the other one. We're actually going to put it right into here. Now this is a little bit of a channel. Remember these things are sitting there, so now we've got things being held by gravity by the top and the bottom. Something to be aware of. Okay, so as we take the top here, we're going to set it. We got to go front to back, and we know which side's the back on our Miss Wanda here, doo doo doo doo doo, okay. You see it's nice and even and set haul, I'm going to put my fingers here and invert her. Now, her tail makes a nice little jack stand. This is the beautiful part about Wanda. That and her smile. Four screws, right in, mmm-kay? Pop it right out of there and again, making sure that your drill is set to the lowest setting, so as not to push it straight through the cleaner. Slippery suckers. Doo doo doo. One in all the four corners. We can see exactly what's happening there. Alright, one more screw and the top assembly's completely set up. We'll take a look at the turbine next.