Making a Free - Form teapot - Adding a free - Form teapot foot
Tip: Highlight text to annotate itX
Before I put this handle on, and while I have that lid in there, securing that hole, I'm
going to try this out because I think it should be pretty fun. I found this tube here, and
what we can do with this tube is we can just take this guy, and just kind of go like this
with him, over the tube. Make sure you have your lid in there when you do this because
you're going to disturb that hole that we made. What we're doing is we're giving it
a foot type of thing going on, like that. Make sure that it's nice and centered there.
Now you can see that, get this out of the way, you can see what it did. It kind of gave
it this area right here, which is nice because when you bring it to your wood kiln or your
soda kiln, it gives it an area to react within the kiln and it will give you some nice effects
down there, and it's better than just being flat. It's cooler that way.
