$31 Diy Prop Rocket Launcher

Hey it's Chris Cowden from the Chris Cowden Channel Hey and it's Jonathan Holeton from Johny5 We are going to show you how to make a replica Rocket launcher we went to the harware store first thing we got was this big black PVC pipe four feet...it cost $12.50 exactly, so that will be the base for it some ends for the back so these where about six dollars each so the idea is we're gonna have the end of our Rocket launcher here and the front here will cover and this part Chris is going to paint it dark green, so it looks nice and then put a sight, and John has this, this is perfect you got this off a high 8 camera? we got this from our old VHS video camera, it just unscrews off we're going to screw it in as the handle this is our Finished Rocket Launcher for a movie prop and we're going to use this in our short film, "Predict This!", which you can watch on my channel or Johny's channel basically this is the finished product. So if you want the paint to stick on the PVC pipe just sand it down the paint will stick alot better. For paint, make sure to use Plastic paint i bought one at the hardware store for $7.00. It was camouflage. What did we use for the parts? We have a scope here, that we used from a toy gun and glued that on the handle is from your old camcorder we got these ends from the hardware store it looked perfect for it.We didn't have to paint them and we have this fake sight. so uh... we're gonna do some test footage you can check that out it's our "Mustang vs. Rocket Launcher" video it's a bit of a test to see how our short film will go. you can watch our film "Predict This!" on my Chris Cowden channel or my Johny5 channel, so if you like the videos please Like and Share and Subscribe! Definately!...high 5! chhh..ching! :b