How to De - Lacquer brass

How to De-Lacquer Brass. Brass is usually lacquered to prevent it from oxidizing, but you can remove the lacquer without damaging the metal underneath. You will need Hot water Scouring pad Acetone Cotton ball Denatured alcohol Cloth Brush (optional) and new coat of lacquer (optional). Exercise caution when working with lacquer. It is reactive and flammable. Step 1. Try using hot water to remove the lacquer from large objects. If the lacquer layer is thin, it may peel away. If it is thick, it may crack so you can pull off chunks after the object has cooled. Step 2. Use a scouring pad to remove any remaining lacquer if the object is pure brass. Step 3. Apply acetone to the object with a partially wetted cotton ball and then rinse it off with hot water, if hot water alone does not completely remove the lacquer. Apply acetone to small objects with a brush and then boil them in water. Step 4. Pour denatured alcohol on a cloth and rub it on the surface of large brass objects until the lacquer peels away, as an alternative. Step 5. Re-coat the object with lacquer or leave it unfinished so it can acquire a patina. Did you know Brass typically has a composition of 67 percent copper and 33 percent zinc, but it may vary.