Tip:
Highlight text to annotate it
X
SeeSnake CS6Pak & CS6 Product Tutorial
In this tutorial, we'll cover the basics of operating the CS6
and CS6Pak Digital Recording Monitors.
We'll be using a CS6, but both units have the same features and controls,
and the instructions apply equally to both products.
After unpacking your equipment, be sure to read the Operator's Manual,
which contains important safety guidelines and complete information
about the unit's features and operation.
The monitors can operate on a RIDGID 18V rechargeable battery.
An AC adapter is also available, for indoor use and can be ordered
from an authorized RIDGID dealer.
The camera connects to the monitor with the SeeSnake system cable,
which is stored on the camera reel.
Line up the connectors' pins with the jack, and then tighten the locking sleeve until it's snug
to ensure that you have a good connection and a watertight seal.
If you look at the top of the monitor, you'll find a keypad
that controls the camera and monitor functions.
The Brightness, Zero and Sonde keys perform the same functions as the keys
on the integrated counter that's included with most SeeSnake camera reels.
Refer to your camera's documentation for information on using these controls.
The rM200 camera reel includes a docking handle that can accommodate the CS6.
The handle is a strap, and you'll want to use it to secure the CS6 when it's docked to the reel.
We're going to move our equipment to a nearby cleanout and perform a sample inspection
to explore the CS6's features and operation.
There's a 4" mainline close by, so we'll inspect that one.
Our entry point will be through a cleanout in the floor.
Exactly how you set up your equipment will depend on the location.
In this case, we're going to place the monitor close to the access point.
We'll keep the monitor within easy reach, and we'll position it
so that we can see the monitor screen and the push cable at the same time.
We'll press the Power key to turn the unit on.
The monitor takes a few moments to power on, and we'll use this time to finish setting up.
When the red progress bar disappears, the CS6 is ready to use.
The CS6 can superimpose text onto still images and video.
Press the Text key to open the text entry box.
Then press the Select key to open the keyboard.
Use the Arrow and Select keys to enter text characters, use the Arrow keys
to navigate the keyboard, and use the Select key to make your selection.
When you're finished, you can close the keyboard by selecting the green checkmark.
You can reposition the text, by selecting the Move icon below the text entry box.
When you're ready to superimpose the text onto captured images
and video clips, select the green checkmark.
To clear text from the screen, press the Text key and choose Yes.
We want to document our inspection with still images and video,
so we'll insert a USB thumb drive.
When the drive is ready for use, its icon will appear at the bottom right of the screen.
A thumb drive can hold more than one inspection job.
This drive doesn't contain any other jobs, so the CS6 will automatically create one
for us when we begin capturing media.
We'll grab a still image of our access point, and then we'll start our recording.
If we want, we can pause the recording with the Select key.
When we're finished with our sample inspection, we'll press the Video key to stop our recording.
With the CS6, we can easily review our still images and video clips.
We can also preview the inspection report and add customer and job information,
as well as notes on captured media.
We'll press the Job Review key to open the Job Review screen.
If we navigate to the right, we can enter a company, customer and job information
that will be included in the inspection report.
The camera icon represents the still images we've captured.
We can view an image, and we can add notes using the on-screen keyboard.
When we're done adding text, we can close the keyboard by selecting OK,
or we can press the Menu key and select Save.
The movie camera icon represents the video clips we've recorded.
We can play clips, and we can annotate them with text comments.
We can pause playback with the Select key.
And we can press the Menu key to return to the Job Review screen.
The page icon will open a preview of the final report.
If you've entered customer or job information, or annotated your still images and video clips
with notes, you'll be able to see it as it will appear to your customer.
When we're done, we'll press the Menu key to close the report,
and then we'll press it again to close the Job Review screen.
We want to take a look at the report on a laptop, so we'll make sure
that the green checkmark is visible at the bottom of the screen.
This indicates that we can safely remove the USB drive.
To avoid damaging your media files, never remove the thumb drive unless the green checkmark
is visible.
On some computers, the USB drive will launch automatically when it's inserted.
If it doesn't, simply open it,
and then double-click the report file to view the inspection.
Depending on your browser, you may need to allow blocked content in order to view video clips.
In the past few minutes, we've taken a quick look at operating the CS6
and CS6Pak Digital Recording Monitors.
On behalf of the entire RIDGID team, thank you for buying SeeSnake diagnostic equipment.