Renoid ビブラートの付け方（lfo デバイス使用）how - To add vibrate

This is the explanation of a method which adds vibrato on the singing voice using LFO device. First, please listen to the tune. This is the LFO device. It can control a parameter by regularity cycle. You can load the LFO device from the FX list on the left. In the three columns here, you can specify the parameter to control. This [CT] means "Current Track". Next, select the device on the track. Choose "KeroVee" here. Finally, chose the parameter in the device. The parameters of "KeroVee" are listed here. Here, choose "Calib". That is, the LFO device is set up to control this *** called Calib. And there is a parameter called "Amplitude". This determines the shake width of LFO. Like this, shake width becomes large, and vibrato starts. Next, the explanation of Effect commands. This [1001] is, to switch ON/OFF of the device. The first "1" expresses the order of the devices, so in this case, it points out the LFO device. [1001] is ON, [1000] is OFF. This command is automatically inputted by right-clicking the button here. Please keep in mind that if you right-click a parameter, the command is inputted automatically. Next is [1400]. The first "1" means the 1st device, that is, LFO device. Next "4" means the 4th parameter, that is, Amplitude. The last "00" means the parameter value. When the value is [1455], the Amplitude slider moves a little. Like this, the Amplitude value is controled. These commands can be inputted by right-clicking too though, Be careful of the icon here. When the icon is in the left state, if you right-click the parameter, the effect command is inputted into "Pattern Editor" automatically. When the icon is in the rigft state, the effect command is inputted into "Automation graph" automatically. Please set it to the left state this time. For example, if you right-click the Amplitude fader here, [1455] is inputted here automatically. If you lower the fader to zero and right-click it, [1400] is inputted as well. When you input commands in this way, your workflow becomes easy. Like this, switching ON/OFF of vibrate are controlled.