Review of The Sportrack Ez Hitch Bike Rack on a 2013 Honda Fit - Etrailer

Today on our 2013 Honda Fit well be test fitting the Sportrack two bike carrier, part number A30901. To begin our test fit well slide the shank of the carrier into the opening of the hitch tube, align the threaded pin holes, well thread our anti-rattle bolt through the threaded pin holes and tighten with a wrench. Now lets go over some clearance measurements to see how this bike carrier and the vehicle fit together. There is about 8 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 9 inches. Weve added about 26 inches to the overall length of the vehicle. To access the cargo area pull the three safety pins located at the base of the carrier and fold the wheel cradles as well as the mast. This will allow you to have access to your cargo door. To load the bike, first make sure that the mast is in its upright position and the frame hooks are at the top of the mast and your cradles straps are undone. Sit the bike in the wheel cradles and adjust the frame hook tightly against the frame. Then secure it with the cradles straps.