Tip:
Highlight text to annotate it
X
Super Quick Super Clean... If you've ever used a dugout you know how that bat gets clogged
up. Here's a dugout it has a space for cannabis and your bat. Fits in your pocket, nice and neat.
First we take a rolling paper and we tear
off approximately a third, probably just a bit more than I'm tearing off here. Take that
piece and you want to fold it up and keep folding it and keep folding it until it makes
a little tight *** of paper that just barely fits in the end of the mouthpiece end of the
bat here. Shove that in... the tighter the fit the better it will be, so...
Take this piece of coat hanger wire that I've cut and bent and slowly push that through...
careful to keep all that resin away from your fingers and on the paper only.
THere it goes squirting out... bam, alright grab it with the paper... clean off the end
of that wire and you really need a safe place to put that wire down, I usually use another
rolling paper but I didn't for this. If you don't have the wire you can use the
q-tips, uh, take 2 q-tips and cut the ends off of one of them and one end off of another.
You see here I'm flattening the resin into the paper... if I absolutely have to smoke
it because I'm done with...I'm out of meds...Uh... I'll makes it a lot easier to slice it up
into thin little bits. And there you see the bat is clean...
You can also like I said, use the q-tip... press that in and then use the other end to
push that through, it'll push the paper through just like that piece of bent coat hanger wire
did. And clean the end off... resin is nasty.