How to Make a Cheap Barrel Wrap!

Greetings comrades, today I will be showing you how to make a cheap barrel wrap for your marker. Paintball stuff are quite expensive nowadays and I'm pretty sure barrel wraps are too although I don't really go online to do some research and check out most prices So, you know that chick down at your field that you never really had the balls to talk to and you've been wanting to start out with something and maybe you'd look here and... no? Maybe that's just me... :P let's just get on with it... so what you need is: 1) the back part of the barrel. unless it's a one-piece barrel... 2) Some cloth 3) Colored pens or highlighters... 4) permanent marker or pen... 5) Thread and needles... And away we gooo... So first, if you haven't already done it yet is take off the barrel from your marker and take off the back portion of it where you're going to do the barrel wrap Unless you have a one piece barrel and... (going to sneeze) XD PINEAPPLES!!! Alright I think I'm... CHOO!!! :( ... So... Where was I? Ah yes... Second you want to get cloth of your choice and measure it to the length of your barrel and you want to leave about the centimeter or an inch from the end... Not from the threading part but where the barrel would cut if off like that... Then, once you've measured it you want to cut out... ... Well, ***... MOM!!! So once you've cut out the cloth piece, It should look something like this. Eh, don't need this anymore... Your cloth should look something like this. Like I said, leave a centimeter or an inch... could be a bit longer... away from the end part... Then what you want to do if you haven't had a design in mind already... Is to have one... COLOURSSS... XD Mine will have this logo... you know what it is. I don't wanna say it coz it's copyright and my name tag. It'll look something like this... Here... XD First, you want to colour the background of the cloth ... This is a very long LONG (that's what she said...) Process... So, a lot of patience will be needed... (Thirsty XD) After you're done, it should look something... something like this... I think... Next, you want to take your barrel and put the cloth on the opposite side and sow it on... Again, this is a very long process, and a lot and I mean a lot of patience is needed... You want to go over a few times, so that the sowing would be strong and it wouldn't come out so easily... I did about 4 rounds on it, And once you reach the end, you want to take the first strand where you first started and the last strand where you end and tie it in a knot End product should look like this Next, what you want to do it cut off the excess pieces... and turn it over And it should look something like this Then, at this point... Any detail you might want to add like numbers, drawings and so on... Should be done now. Like I said earlier, I'm writing my name tag and my jersey number on one side and HK army (ALL DA WAY! XD) plus it's logo on the other... and my design looked like this. So your end product, should look something like this... HK. Army And here it says HellCat - 916 (Autocorrect said: healthcare mind went sick) :P I hope you found this tutorial useful... If you did, why not give it a like, a comment, and be sure to leave a subscribe if you haven't done it yet. It will really, really help us out! and if you need any other tutorials don't be afraid to ask. Alright? Thank you for watching! See you next time! *UniTac handsign! :D