Two Brothers Racing - Slip - On installation tutorial
Tip: Highlight text to annotate itX
You just recieved your exhaust, and now its time to install it.
Remove all the contents from the packaging. Make sure the bike is cool, then secure it
to a rear stand or service lift. Remove the muffler clamp and mounting hardware
With a twisting motion, slide the muffler off the mid pipe
Snap the x ring halves together, and slide it over the slip tube
Place the four socket head screws and lock washers into the x ring
then loosely attach the slip tube to the muffler with the supplied alan wrench
Slide the barrel clamp over the slip tube and the muffler clamp over the muffler
Install the completed assembly onto the mid pipe
twist the slip tube and the muffler in opposing directions to adjust for proper alignment
mount the assembly using OEM hardware keep it loose until the alignment is confirmed
confirm the alignment tighten the screws
the muffler bolt and the barrel clamp
do so in this order double check your work, and head to the track
