How to - Use the display on pedego electric bikes

Hi, this is Mikey at Blue Monkey Bicycles and today I'm going to be telling you how to use the display on Pedego electric bikes. First up, make sure the battery is in and the key is locked. Cool. After pressing the top button on the display to turn it on, it will load up and show you a few things. The first is the battery gauge. This displays how much battery charge you have left. Next is the MPH indicator. Once you get going it will give you a live reading of how fast you're going. On the bottom left is the Pedal Assist level. And to the right of that is the variable display, which shows the total odometer by default. OK, by pressing the Set Button, it will cycle through modes on this variable display. After the total odometer, is the trip timer. And after the trip timer is the trip set: just like the one in your car, it tells you how far you've gone. And after that is the maximum attained speed this trip. Pressing the Set Button again cycles through each of these displays for a few seconds each. And pressing the Set Button one final time will just go back to the total odometer. You can reset the trip timer, trip set, and the maximum attained speed by holding the - button for a few seconds. This will take all three of those back down to 0 at the same time. Pressing the power button after the display is already on will then turn on the front and tail light simultaneously. And pressing it again will turn the front and tail light off. To turn off the bike; press and hold the power button for a few seconds and the bike itself will turn off. Check out the link on our Pedal Assist feature to learn how to use this top selling feature. Feel free to come on in for a test ride, or check us out at bluemonkeybicycles.com