S1b01 Knight Online Gerçek Shard Yapımı Irl How to Make

Good day to everyone. Here I am with the first video of my channel. In this video I'm making Shard from Knight Online. If I am to give a brief information for who doesn't play the game Shard is an assassin class weapon. It is used dual. Depending on server condition, It has always been an in demand weapon for assassins. It has variations such as Shard, Exceptional Shard, Hepa's Shard. They all have same appearance including unique weapon named Dark Vane. Now let's take a look how i made it. Fantastic items and how to make them First of all, I drew head part of Shard on drawing program. You can download from the link below freely and print if you want to give it a try. I cut a piece out of timber and planed both sides of it. The ones who will be using planed material can skip this step. I transferred drawing that i had printed with carbon paper. Then, I thought it was too thick and used one of the figures. I cut out the figure with jig saw. You can use fret saw for less cost. I split the shape into two and got two daggers. But asymmetric errors occured like these. And the parts which will be connected with handle were broken I fixed the errors and glued broken parts. I used mirrored form of the same drawing to define the lines which were on the backsides of the daggers. I sanded daggers to make up the difference. I drew reference lines onto cutting parts of the daggers. I leveled this line with the line on the side by sanding and rasping. And I got a sharp look. I made this process for both sides. I made the final adjustments with rasp and got the final forms of cutting parts. The material i used for handle is adze handle. Cheap and easy to find. I cut handles in random sizes and glued them together. The reason i did this is Shard's handle got a look like its diameter is increasing towards the tips. I used super glue which is selling with it's activator. All you have to do is gluing one side and spraying activator other side. I rasped remained dried glue. I had smoothed areas that i glued cutting parts on before gluing. I drew border lines. I glued cutting parts in these border lines carefully. If there are gaps between parts you can use hot glue as a filler. Spread before drying completely and sand after drying. I cut extra little parts out of adze handle for tail parts of daggers and drew a circle on them. I leveled circles i drew and bottom circumferences. I drilled holes onto handles which has same diameter as rod I've got. I cut parts out of rod random lenght. I connected handles and tails with these parts. I prepared surfaces for painting with fine grit sandpaper. Then I cleaned off the dust. I applied primer as the last step before painting. After two coats of primer I wet sanded daggers. I thinned my paint with water. Because it is water-based. I applied paint five or six coats carefully. I taped the handles spirally with masking tape to get spiral lined look. I covered areas that souldn't be painted. After applying yellow paint, I applied black paint on handle without covering it entirely. I sprayed thin black paint on cutting part and spread it with dry cloth longitudinal. It has given us more realistic metal look. I found yellow lines were covered too much and repainted them. As final step, I covered daggers with two coats matte varnish. Shards are ready. Hit the like button and subscribe if you like. Thanks for watching.